Tuesday, 16 April 2024
22.7 C
Durban

Collab delivers custom mixer for KZN feed producer

Home Agriculture Collab delivers custom mixer for KZN feed producer

WHEN specialist feed-milling original equipment manufacturer, Dalein Agriplan, was tasked with designing a one-of-a-kind high-speed, high-capacity mixer for a leading South African animal feed producer, it turned to SEW-EURODRIVE.

Because the client’s requirement was for a 6 000-capacity mixer and Dalein Agriplan had not previously delivered an installation larger than 5 000, it collaborated with SEW-EURODRIVE to develop a bespoke solution – the prototype MPT6000H heavy duty twin-shaft paddle mixer.

Given that this was a prototype and they couldn’t rely on any previous data, the two companies worked closely on the necessary calculations and specifications.

The aim was to design a mixer capable of producing the required level of torque, while running at optimum rotor speed for the effective product blending that was required by the client. Part of their challenge was to enable a three-ton batch of feed product to be mixed in 90 seconds, whereas this previously took around three minutes with the original single-shaft mixer.

To meet these requirements for increased speed and mixing efficiency while processing a larger quantity of animal feed, SEW-EURODRIVE supplied two industrial gearboxes with XT configurations.

The XT gearbox forms part of the industrial X-series gearbox manufactured by the company in Germany. It is a coaxial bevel-helical industrial gearbox, creating a unique gearing system with shaft positions that allow it to utilise a twin-shaft mixer instead of a single-shaft mixer.

For this project, the specific size of the gearboxes was calculated to deliver the required torque at the optimum speed. The two gearboxes are driven from a single motor using a dual-input coupling.

Following installation of the mixer at Dalein Agriplan’s client – animal feed supplier De Heus South Africa’s factory at Umlaas Road in KwaZulu-Natal – SEW-EURODRIVE inspected the on-site setup of the gearboxes on the mixer, while Dalein ensured successful start-up and commissioning.

“Although the bespoke design and engineering requirements presented certain challenges, arguably the greater test was navigating the supply chain process between Germany and South Africa during the stricter levels of lockdown,” said Phillip Steyn, Sales Representative at SEW-EURODRIVE South Africa.

“But, with agriculture being an essential service and SEW-EURODRIVE being an accredited supplier of essential services, international shipments and local deliveries were completed on schedule.”

Although the XT gearbox is sourced from Germany, spare parts are stockpiled locally and available at short notice to South African clients, along with the necessary technical support.

The successful collaboration on the De Heus project continues a long history of co-operation between Dalein Agriplan and SEW-EURODRIVE. The former has been incorporating SEW products into its plants and projects for many years.

Most Popular

The new ‘City of the West’ showcases opportunities

THE Westown development team and Fundamentum Property Group hosted more than 40 residential, commercial, and industrial brokers and agents at the Westown construction site...

Sibaya node north of Durban attracts investment

LOCATED between the Ohlanga and eMdloti estuaries on KwaZulu-Natal’s north coast, the Sibaya Coastal Precinct has undergone a remarkable transformation over the past decade...

Full closure of the N3 due to blasting near Peacevale

THE N3 in KwaZulu-Natal will be fully closed on 10 April 2024 between 14h30 and 15h00 to facilitate blasting next to the N3 opposite...

Precise planning, clear goals and optimisation are key to supply chain success

AS one of the leading manufacturers of industrial gas, Air Products has established a successful supply chain strategy, crafted from industry experience, best practice...